Canon PIXMA MG2140 Error Code and its Solution

Richards
By -
0
Canon PIXMA MG2140 Error Code and its Solution


Canon PIXMA MG2140 Inkjet Multifunctional (Print, Copy & Scan) Driver and Software download for Microsoft Windows 32bit – 64 bit and Mac Operating Systems.

PIXMA MG2140 is becoming one of those printers that many people choose for their office or home needs. This printer has full functions so that all your business task demands can be discovered on this printer.

When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message.

When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen. For some errors, the ON lamp and the Alarm lamp flashes alternately. Check the status of the lamps and the message, then take the appropriate action to resolve the error.

Canon MG2140 - Error E03


This error is normally the result of a paper jam. Small pieces of paper can get caught inside the printer mechanism if you had to rip the paper out of the machine. Have a really good look inside to see what is still stuck. It may not be paper that is causing the jam. It is quite easy to put an object on top of the printer only for it to fall in to the printer accidentally.

Canon MG2140 - Error E05 / Error E07


This error is shown when there is a fault with one of the cartridges. Remove both cartridges and then insert them again. Having some old cartridges around can be handy in this case. Change each cartridge in sequence until the error clears, this should help you identify which cartridge is causing the problem.

Canon MG2140 - Error P02 / Error 5100


The Canon MG2140 can display this error for a few reasons. It could be that one or both of the cartridges are not inserted into the printer correctly. One or both of the cartridges may have failed electrically, and need to be replaced.

There may be a paper jam, check the printer thoroughly for any small pieces still stuck inside. The encoder film strip may have some dirty marks on it, and therefore needs cleaning. The encoder film strip in the clear strip of plastic that the printer carriage runs on. Be extremely careful when touching this, as it is very delicate.

Canon MG2140 - Error P07 / Error 5B00 / Error E08


This error is shown when the waste ink absorber is full in the printer. Every time the printer runs a head cleaning routine, it flushes some ink through the print heads to keep them clean and clear. That ink runs in to the waste ink absorber. It is normally a large sponge or tank.

The absorber can be can be cleaned, emptied and reset but it is an extremely difficult and messy process. This means that the printer is at the end of it's life. Be careful when moving and disposing of the printer though. The ink absorber is full and so there is a small chance of the printer leaking when it is moved! To be on the safe side, put it in a large bag first.

Canon MG2140 - Error P08 / Error P10 / Error 5200 / Error B200


This error is shown when there is a faulty cartridge or a problem with the logic board in the printer. Most cases are due to the cartridge, and can be rectified by replacing the faulty cartridge. This can be checked by installing some old cartridges to see if the error clears. If it is the logic board, it is cheaper to replace the printer than to repair it.

Canon MG2140 - Reset Ink Levels on the Cartridges


The printer cannot physically see inside the cartridges to find out how much ink is left. The copper contacts on the outside of the cartridge contain the ink level information. It is not possible to reset the ink levels to full. If you refill your cartridge, the printer will always show an empty cartridge message.

You can override the empty cartridge message by holding down the “stop / reset” button on the printer for around five seconds. The printer should continue printing, and use any of the remaining ink in the cartridge.

If the printer thinks that both cartridges are empty, you will receive a second error message, and you will need to hold the button for another five seconds. If the electronics on the cartridges have failed, unfortunately this process will not work.

Canon MG2140 - Change Ink Cartridge


Canon MG2140 - Head Cleaning Routine


Press the maintenance button on the printer repeatedly until the LED displays "H". Now press the black or colour copy button to run a head cleaning routine. This procedure takes some ink from the cartridges and flushes it through the print heads to try and remove any blockages. These blockages are the main causes of poor quality print.

Be warned, every head cleaning routine run will use some of the ink from the cartridges, and is the quickest way to use up all of the ink.

Canon MG2140 - Deep Head Cleaning Routine


Press the maintenance button on the printer repeatedly until the LED displays "Y". Now press the black or colour copy button to run a deep head cleaning routine.

This procedure is very similar to the standard head cleaning routine, but should be used when there are significant blockages in the print head.

However, this process will use a large quantity of ink in order to flush the print heads. Use this sparingly, it can be very easy to run a few of these procedures and use all of your ink.

Canon MG2140 - Alignment Page


Press the maintenance button on the printer repeatedly until the LED displays "u". Now press the black or colour copy button to print the alignment page. If the print is blurry or misaligned, this process should help rectify the problem.

Take the alignment page and place it printed side down on the scanner. Make sure the printed triangle in the corner of the page is aligned to the same corner as the embossed arrow on the plastic surround of the scanner. Close the scanner lid. The LED should now be displaying an uppercase "U". Press the black or colour copy button to complete the automatic alignment.

Canon MG2140 - Clean Paper Feed Roller


Remove all paper from the printer. Press the maintenance button on the printer repeatedly until the LED displays "b". Now press the black or colour copy button to run the first cleaning phase of the paper feed roller.

Once the paper feed roller has stopped rotating, place three sheets of plain paper in to the paper tray. Make sure "b" is still showing on the LED and press the black or colour copy button. Once the cleaning routine has finished, press the stop / reset button to return to stand by mode.

Canon MG2140 - Bottom Plate Cleaning


Press the maintenance button on the printer repeatedly until the LED displays "J". Now press the black or colour copy button to clean the bottom plate. If your prints are coming out dirty, there may be stains on the inside of the printer. This procedure will help to clear these away.

Canon MG2140 - Switch Paper Size


Press the maintenance button on the printer repeatedly until the LED displays "d". Now press the black button to switch to A4, or the colour button to switch to Letter.

Canon MG2140 - Prevent Paper Abrasion


Press the maintenance button on the printer repeatedly until the LED displays "r". Now press the black button to allow for thicker paper to run through the printer. Press the maintenance button on the printer repeatedly until the LED displays "r". Now press the colour copy button to allow for thiner paper to run through the printer.

Post a Comment

0Comments

Post a Comment (0)

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Learn more
Ok, Go it!