The printer head is one of the components on the printer that plays an important role. If there is one problem, then 90% of your printing process will be hampered. For example, if the printer head is clogged or damaged, answer with this condition, you will not be able to use the printer optimally, manage, adjust the printer head, causing two things.
That is because it is clogged or the nozzle is damaged. This time around the printer will provide information about the Epson Printer Head Replacement Tutorial.
 |
| Replacing Epson Printer Heads |
Epson Printer Head Replacement Tutorial
A damaged printer head because it is clogged can cause the ink you are using. While the nozzle is damaged due to over head or head due to heat which causes the ink to be unnecessary or not come out at all. I
f you have changed the damage like that, you have to replace your printer head, here we share the steps you can use to replace your Epson Printer Head. This step applies to all Epson printer series.
- Please, my friend, remove the screw on the printer carriage again. There is a screw cartridge cover that serves to protect the cartridge. On the front side of the cartridge there is a small hook. Take a screwdriver and then pry it out with the complete cartridge available. Remove the ink hose attached to the carriage.
- First remove the printer casing buddy. Find your screw printer and release it. Also remove the screw on the front of the printer.
- If all the screws have been removed, the side of the printer will show a hook. Please, my friend, pry it using a screwdriver. Also remove the hook at the bottom of the printer and lift the printer case from the stand. If the casing has been successfully removed, my friend is ready to enter the wall for a head change.
- Before lifting your head, here you need to take it on the right and left sides of the carriage, which is a small hook. The hook serves as a holder, so that the cartridge can be installed firmly. Please remove it by removing the hook and then opening it and lifting it up. To make it easier to work with, try to use sliding the carriage unit to the middle, try pressing the carriage lock on the back. The color is small white, use a screwdriver to replace the lock.
- On the head, there are 3 (three) bolts that release the head firmly, remove all three. After all the bolts are removed, unplug your head cable. Do it carefully.
- Up to this stage, my friend has managed to complete the printer head that is no longer suitable for use. Next, install a new printer head, which you have prepared in advance according to the steps when you removed the head.
 |
| Epson Printer Head Replacement Tutorial |
Thus the Epson Printer Head Replacement Tutorial that Erzedka.com can share this time. Hopefully you can replace your damaged printer head by applying the steps we have provided. Good luck and good luck. Look forward to other interesting tutorial articles. Dont forget to comment below..!!