When the print quality of the Epson printers your business relies on decreases, dirty print heads may be to blame. The print head is responsible for transferring the ink to the paper. Over time, dried ink can clog the printheads, causing light or dark streaks to appear throughout your printed document. Cleaning the print head can clear these blockages and restore proper ink flow.
For those of you who have an Epson L120 Printer and want to clean it, then you can immediately follow the tutorial on How to Clean the Epson L120 Printer, below:
How to Clean the Epson L120 Printer
- Turn on the printer and confirm that no print jobs are printed. If the ink light on the front of the printer is blinking, you must replace the cartridge before you can continue.
- Make sure there is paper in the tray and add paper if necessary.
- Click “Start” and “Devices and Printers” to see a list of all installed printers and then double-click your Epson printer. Double-click “Customize Print Options” to open the Printing Preferences dialog box. Select the “Maintenance” tab and click “Head Cleaning.” Alternatively, you can right-click the printer icon in the system tray and select the “Head Cleaning” option. These options may vary slightly depending on the version of the Epson software installed on your computer. From the Mac, you must click on “Applications,” select “Epson Printer Utility” and then select your Epson printer from the list. Click “OK” and then select the “Head Cleaning” option to open the Head Cleaning dialog box.
- Click “Start” when prompted to start the cleaning process. Some versions of the Epson software require you to click “Next” to continue.
- Wait for the head cleaning process to complete. This process may take a few minutes. Turning off the printer during the cleaning process can permanently damage the device. The printer power light, which flashes during the cleaning process, will stop blinking after the process is complete.
- Click the “Print Nozzle Check Pattern” option and then click “Print.” Your printer prints a series of staggered lines. From a Mac, click “Confirm” followed by “Next.”
- Review the printed Check Nozzle pattern sheet. If the pattern shows solid lines without any gaps or faded printing, the cleaning process was successful and you can click “Finish.” If the pattern contains gaps, then click “Clean” to run the print head cleaning process again.
TIPS !!
- Many Epson models allow you to use the printer control panel to run the printhead cleaning utility. From the control panel, press and hold the “Ink” button for three seconds. Release the button when the power light starts flashing and you hear the cleaning process begin. Wait until the power light stops flashing, indicating that the cleaning process is complete, and then print a nozzle check pattern to make sure the printheads are clean.
- Epson recommends using Epson ink cartridges rather than third-party equivalents. Using the wrong ink can cause recurring print head problems.
Warning !!
- The printhead cleaning process uses a lot of ink. Do not try to use the printhead cleaning utility if you are running out of ink.
That's the information and also a tutorial on How to Clean the Epson L120 Printer that we can convey. Hopefully all the information above can be useful and can help solve your problem. Good luck, good luck!