One of the best-selling Epson printer series in Indonesia has a lot of positive feedback from its users but no doubt there is also a lot of negative feedback because errors or printer damage were not detected during production.
The Epson L-Series type L-565 is a type that is also quite in demand in the Indonesian market, since it was first launched. Printers equipped with original ink tanks quite often encounter problems with resetting the eeprom error in the ink due to intense and large amounts of use in a period of 3-7 months, but apart from asking to reset the Epson L565 printer, there are also errors that are quite often found. from the comments of its users, namely error 0xF1.
So, for those of you who are users of this type of printer, and want to solve the Epson L565 0xF1 error yourself, you can try to do some of the steps that the Erzedka.com has shared below, but if you really feel you have read the tips on how to solve the error and it turns out that you are not brave enough because some can't , it's better to leave it to the official printer service technician of the brand or a trusted printer service around you.
OH YES IMPORTANT! Remember, if you buy a printer when it's in new condition, it's a good idea to use the existing printer warranty by bringing the printer to the nearest service center, if that's true, of course, this makes worries about damaging the printer costing a lot of money not happening.
What causes error 0xF1 on the Epson L565?
Well, we also need to know this, actually there are quite a lot of descriptions about this on the internet and even then they vary, but what happens to some printers is that the movement of the head or other components is disturbed so that it doesn't run smoothly and moves normally in the process, usually this happens because there is something wrong with it. Foreign objects or other components that enter when the paper media is pulled, or accidentally enter.
So, for those of you who are experiencing the same printer error problem, you can get a solution on how to solve it, which we have summarized from several blogs and mainly we got a method from Mas Eko Hasan's blog, which provides a review of the right way to deal with the Epson L565 printer error 0xf1.
The solution for how to solve the Epson L565 0xF1 error
- You can solve this error by checking on the paper tray, whether there are foreign particles such as staples, iron, paper clips that enter and cause interference with the head movement process.
- After it was felt that there were no foreign objects in that section, look at the last part of the paper that did the printing process, some people use used paper again to print and they don't realize that there are staples attached. if so, it could be that the foreign object was left inside
- If you don't find anything, you need to disassemble the printer to further ascertain the cause of the disturbed component movement
- After successfully dismantling, try to check again carefully what foreign objects/components are around it, also check whether there are components/parts of the printer head that are broken or destroyed so that the process is not optimal.
- If there is a foreign object clean it until you are sure there is nothing left (breaks, residue, etc.), if the cause is component damage then you need to replace it, well if you don't know more clearly what components and what needs to be replaced, our advice is to submit this to only experts (printer service, printer repairman)
- Done..
Now that's a little information that we can share regarding the Epson 565 0xf1 error problem which causes the printer to be not optimal and cannot print. Take note and pay close attention to the problem so that you have a new and fast experience if this problem comes back, hopefully it will be useful and thank you.