Has it ever happened to a friend that you have experienced problems when printing with a Canon Pixma IP2770 printer when the printer is turned on normally, but when you want to print, the message "Ink Absorber Full" suddenly appears. Maybe my friend doesn't know which absorber means, for sure, we can't buy this compilation of terms.
Actually printing can still be done with resume resume at about 6 sec/sec. But if this is allowed to continue then in the end we can't go back even if we still manage to continue. To work around this, the printer can be reset to the default program. The following steps around the printer are summarized to find out how to deal with a full absorber on a Canon IP2770 printer that is good and correct.
 |
| Canon IP2770 Printer |
One printer that is widely used for printing is the Canon iP2770 printer. The Canon iP2770 is a sophisticated printer that is comfortable to use according to your needs, both at home and in the office. With a resolution of 4800 x 1200 dpi, the print quality produced by this Canon printer is sharper and better.
This Canon iP2770 printer can be used in well-known operating systems such as Windows and Macintosh. Use the electrical power from this printer is not too big, my friend only needs about 100 to 240 volts to use this printer. The weight and dimensions of the Canon iP2770 also include ergonomics, which is 3.4 kg with dimensions of 445 x 250 x 130mm.
This printer is also often preferred by many people as the best printer for printing photos with a maximum size of A4 or more. Plus Chromalife 100+, a resolution of 4800 x 1200 dpi will be very capable of producing very clear and clear photo quality prints. you also only need to wait about 55 seconds to buy photos with the Canon IP2770.
Another advantage of the Canon IP2770 that makes this printer the best for printing photos is the FINE Print Head technology. With this technology, the durability of the printing ink will be very good.
Despite being one of the best printers in its class, of course there are still some problems that you often experience when you compile using a Canon IP2770 printer as a machine to print your documents. One of the most frequent problems is the full absorber problem on the Canon IP2770 printer. Your Canon IP2770 printer has reached the agreed limit. Yes, with an advanced printer like this, you should definitely install any purchase.
The problem with the full absorber on your printer is not really the problem you are doing. More technology released by the Canon IP2770 will make you calm, because you will be switched by your printer itself through the code that comes from turning on the orange light on your printer four times.
 |
| Full Absorber on Canon IP2770 Printer |
If you have realized that your printer can be completely repaired, there are a few easy steps you can take to get your printer back to normal.
- The first is that you have to install your printer, it is not activated.
- After that, you have to move and hold the continue button where the orange flashing light is activated
- Then, you have to restart the printer by activating the power button, and by holding down the power button you have to release the resume button
- After that, you have to press the resume button 6 times, and compile the push, you also have to replace the power button
- Finally, release all buttons and your Canon IP2770 printer will be done properly again
Thus a review of the specifications of the Canon IP2770 and also the features it has. In addition, Erzedka.com also discusses how to overcome the full absorber on the Canon IP2770 printer that you can do yourself safely and easily.
Hopefully our information this time can be helpful and useful, good luck my friend and good luck! Dont forget to comment below..!!